How to Remove Clothing Sensor Tag

Sensor tag on clothing specially made for safe from robbery. The store needs to protect itself from internal (employee) and external (robbery) shoplifting.

Clothing Sensor tags provide security towers and tags that monitor entry and exit methods to alert employees when merchandise is leaving the store without proper processing.

These tags have a track record of excellence in the loss prevention industry with over 17 years of selling retail security systems to major name brands and retail outlets.

There are many different types of retail security systems for different types of stores and choosing the right system and clothing tag will prevent false alarms and ensure the store is secure throughout the workday.

After reading this article, You will know how to remove sensor tags from clothes. There are many different types of sensor tags that can be used on clothing.

What is Clothing Sensor Tag

From coats to shoes, apparel is the fourth most stolen retail item, according to the Center for Problem-Oriented Policing.

Apparel retailers place sensors on clothing to prevent theft, often as part of electronic article surveillance, or EAS, systems installed at store entrances.

When tagged merchandise passes through the EAS gate, an alarm sounds unless the sensor has been turned off.

These damage-preventing devices come in a variety of sizes and formats to accommodate a wide variety of clothing and fabrics.

How to Remove Clothing Sensor Tag

If you’re looking to learn how to get rid of security tags from clothing by various methods, follow these steps. Below are some excellent ways to remove sensors for security on clothing.

• Place the clothing item with the cartridge of ink on the floor.
• Make use of a small flat-headed screwdriver and place it on the outside of the square pyramid that has been raised.
• Press with force. The pressure should penetrate the plastic and lift it upwards.
• Continue to appear on the entire perimeter of the material.
• Remove the silver paper lining. You will be able to see the metal plate under it.
• Use a screwdriver to lift one of the metal arms that hold the pin.
• Slide the pin away from the tag. The pin should slide easily out of the now-free hole and the tag should be removed.

Here is one of the popular methods to remove clothing tags.

• Place the tag’s ink cartridge face down. The cartridge for ink is the component of the tag that extends away from the plastic. This is on the opposite side of the pin, which is the round part of the tag.
• Pull the piece of clothing with the tag away from the rest of the clothing. Move it as far away as possible so that the ink doesn’t damage the clothing as much if the sensor bursts.
• Place an elastic band around that pin on the security tag. The rubber band should be thick and large enough to be durable and thin enough to be able to fit within the tag.
• Keep the majority of the tag in one hand.
• Push the pin out with another hand. The pressure of the pin should be strong enough that the pin eventually snaps off or detaches easily from the rest of the tag.
• If the rubber band hasn’t loosened enough, try again with several rubber bands.

Read More:- Laundry Symbols

The most popular method to remove clothing sensors is to use nails and a hammer.

• Take the tag off gently the clothing several times. Do this 10 or more times until the pin is loosening slightly.
• Find a larger nail. It should have a nail larger than the tag and the nail head must be at a minimum about the same width as the width of a penny.
• Take the tag off the clothing. Keep the long part of the plastic of the tag close to the edges.
• Ink cartridges should be pushed down until it opens. Without applying too excessive force, repeatedly hit the cartridge to make it pop up.
• It could be necessary to press it twenty or more times before you can solve the issue.
• Be cautious not to strike it too hard otherwise the tag is more likely to explode.

Removing Electro-Magnet Tags

• Many modern tags actually contain an electro-magnet, not an ink bag; On opening it, you will see for yourself that there is no ink inside it.
• Place something between the head of the tag and the pin to loosen it.
• Move the pin back and forth until it breaks.
• Pull the tag straight back so the pin pops out of the hole it originally went through.
• Break the tag.

You can also remove clothing tags using pliers.

• Place the security tag with the ink cartridge facing up.
• Grab one of the sides of the rectangular tag with a pair of pliers.
• Grab the other side of the tag with a separate pair of pliers.
• Using the pliers, gently pry down each side of the tag. Do not bend too hard or else the tag will burst in half and the ink will spread everywhere.
• Keep bending until it opens. This should loosen the pin and pop it off.

Read More:- How to Use CSC Laundry Card

You can burn clothing sensor tags.

• Burn the tag Using a lighter, light the dome-like part of the tag.
• After burning it for a few seconds, most likely, a fire will ignite in the form of plastic.
• Use a knife, screwdriver, or similar object to cut out the dome.
• As you continue to sear, you will find a spring and the tag will come out quite a bit.

How to Remove Ink Sensor From Clothing

You can follow these simple steps to remove the ink sensor tag from your clothing.

• Freeze the garment with the ink tag.
• Freeze the garment overnight for the best results.
• Rip the tag.
• You can do this with the hands of your fingers, pliers, or even the rubber band method.
• This will ensure that the ink doesn’t spill everywhere if you make a mistake – ink can’t spread if it’s frozen.

How to Remove Plastic Sensor From Clothing

Light the tag Using the lighter, light the dome-like part of the tag. After burning it for a few seconds, the plastic form is most likely to catch fire. Use a knife, screwdriver, or similar object to cut out the dome. As you continue to search, you will find a spring and the tag will come out quite a bit.

Read More:- Will laundry detergent kill grass

How to Remove Magnetic Clothing Sensor

Many modern tags actually contain an electro-magnet, not an ink bag; When you open it, you will see for yourself that there is no ink inside it. Place something between the head of the tag and the pin to loosen it. Move the pin back and forth until it breaks.

Some Types of Clothing Sensor Tags

Here is complete information about three types of clothing sensor tags. RFID tags, Ink Tags and Attribute Tags.

RFID Tag

Plastic security tags clip a radio-frequency identification chip directly to an item. When the chip crosses the detection sensor, an alarm is triggered to alert store employees of theft.

These tags are available in many forms, such as gator, clamshell, and golf ball. In these styles, the two sides of the tag are joined together making it difficult for thieves to remove.

Every type of interlocking clip will require a specific opener. In contrast, strips have an adhesive backing that sticks to the item.

Read More:- How to remove grease stains from clothes

Ink Tag

Ink tags are designed to deter shoplifting rather than triggering an alarm when it is stolen. They are typically used on clothing items that are ruined if stained with ink.

When the tag is removed without the benefit of the equipment used by the store cashier, a vial bursts, and ink spills on the item.

Ink vials can be combined with standard RFID chips to provide an added level of security. However, smaller stores often use ink tags alone to save on the cost of setting up an identification system.

Attribute Tag

Certain types of specialized products require their own customized security tag solutions. For example, bottle tags attach to the cap and set off an alarm when the cap is twisted.

Eyeglass security tags are attached to the frame, usually at the temples or near the end of the earpiece.

The slim design of the tags allows them to be affixed to the glasses without interfering with the customer’s ability to try them. Handcuff tags can be used to secure briefcases and purse handles.

Read More:- How Much Do Laundromats Make

How Clothing Sensor Tags Detection System Work

Without a detection system, security tags are useless. Detectors are usually installed on either side of each exit of the store.

If the sensor is in close proximity to the detectors the alarm sounds. Most tags can also be programmed to set off an alarm if someone tries to remove them without the proper equipment.

Detection systems are usually associated with software that controls the sensitivity, volume and duration of the alarm.

Sensormatic and Checkpoint are two of the most commonly used retail security programs.

Why Clothing Sensor Tags Important

Shoplifting is a major concern for business owners all the time. The store needs to protect itself from internal (employee) and external (robbery) shoplifting.

There are many different types of retail security systems for different types of stores and choosing the right system and clothing tag will prevent false alarms and ensure the store is secure throughout the workday.

Clothing Sensor tag has a track record of excellence in the loss prevention industry with over 17 years of selling retail security systems to major name brands and retail outlets.

Clothing Sensor tag provides security towers and tags that monitor entry and exit methods to alert employees when merchandise is leaving the store without proper processing.

Read More:- Can you use laundry detergent in a carpet cleaner

Security tags protect thieves from taking valuables from shoppers by being able to resonate at a frequency that alerts security towers whenever the item is taken.

The security system then lights up and makes a loud noise to alert employees that someone is attempting to steal an item and that the appropriate authorities can be called.

Items are protected with many different types of security tags including ink tags, eyeglass tags, pencil security tags, barcode labels, checkpoint dangerous butterflies, and cigarette labels.

These clothing tags are placed on the item when it is checked into inventory.

Clothing Sensor Tags also offer magnetic detachers, label deactivators as well as countertop activators. Every cash register station must be equipped with at least one detacher and a deactivator.

They allow employees to remove the tag for single use or to take it off before the consignment is removed from the store.

Make sure your business is protected with tags and anti-theft devices.

Read More:- Best antibacterial laundry detergent

How Clothes Sensors Work

A security tag on clothing is an essential part that is part of EAS technology. A tag is a small “signal transmitter” that you place on the product you want to secure.

The tag will signal to the EAS antennas to make them alarm if they come close.

For Example, If someone is trying to steal the item and trying to get out without paying/removing the tag. We also call these tags consumable at the gateway.

Read More:- What kill ringworm in laundry

Important Tips

Many clothing sensors are removed from stores using magnetic devices. To take them off at home, make use of the power of a magnet that is powerful for example, the magnet for a hard drive.

Place the magnet on a flat surface and place the tags with the ink dome or cartridge face down on top of it.

You’ll hear a click letting you know that the tag has been deactivated. To release the pins in the tag, move them up and down.

Most apparel tags have 1 or more pins that secure the cartridge to the body of the tag.

You may be able to cut the wire if you can manage to get a wire cutter between the 2 halves of the Clothing Sensor Tag, but these pins are thick and can be difficult to cut.

Another option is to use a Dremel tool, but either method can damage your garment.

The ink is usually black or ink-pen blue, so it really should only be used on darker fabrics. If it is light or white, take the time to go to the store and remove it from there.

Read More:- Best laundry services in NYC

One of the larger ‘U’ shaped ones should be strong enough. Do not use leave or chip clip magnets, they will not work. Thanks for reading the article.